Table of Contents
Advertisement
Chapter 5
Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь
5.4 CODE ID
Up to two characters for Code ID can be configured for each symbology. To make the
Code ID configuration easier, the scanner provides five pre-defined Code ID sets that can
select one and make necessary changes on it.
If "Keyboard Wedge" or "USB HID" is configured for interface,
Status
will then become applicable. Decide whether to apply Key Status when select
"Normal Key" for Key Type.
Key Type
Scan Code
Only 1 scan code value is allowed.
Normal Key
Up to 2 character strings are allowed.
Note: "]C1" is the Code ID of GS1-128 (EAN-128) barcodes; "]e0" is the default Code ID
of GS1 DataBar (RSS) barcodes.
Key Status
N/A
Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Refer to
Keyboard Wedge
Update
Key Type
and
Key
Table.
181
- Quick Links:
- Enter Configuration Mode
Hide quick links:
Advertisement
Table of Contents
