Defining Output Format; Letter Case - CipherLab 2564 User Manual

DEFINING OUTPUT FORMAT

Users can configure the data output format in which the collected data will be output to
the host computer. Barcodes read by the scanner will be processed in the following
sequence -
1) Perform character substitution on the data scanned.
2) Add Code ID and
3) Process the whole data in step 2 with user formats. Data is now divided into fields by
user specified rules. Refer to
4) Add Prefix Code
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case .............................................................. 169
5.2 Character Substitution ............................................... 170
5.3 Prefix/Suffix Code ..................................................... 180
5.4 Code ID ................................................................... 181
5.5 Length Code ............................................................. 189
5.6 Multi-Barcode Editor .................................................. 194
5.7 Removal of Special Character ..................................... 200
Ошибка! Источник ссылки не найден.Ошибка! Закладка
не определена.

5.1 LETTER CASE

By default, the alphabets transmission is case-sensitive, meaning that the alphabets will
be transmitted according to their original case. Ignoring the original letter case, select
[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output
data in lower case only.
Length Code to the front of the data:
Chapter 6 Applying Formats for Data
and Suffix Code
[Code ID][Length Code][Data]
before transmission:
*Normal
Upper Case
Lower Case
Update
Chapter 5
Editing.
[Prefix Code][Processed
169