Good Read Led - CipherLab 2560 User Manual

1.3.1 GOOD READ LED

1.3.2 GOOD READ LED DURATION
By default, the Good Read LED stays on for 40 milliseconds. Specify a value, ranging
from 1 to 254 in units of 10 milliseconds.
1) Read the barcode above to specify the time interval before the Good Read LED goes
off.
2) Read the "Decimal
Good Read LED to go off after 150 milliseconds.
3) Read the "Validate" barcode on the same page to complete this setting.
Value" barcode on page 227. For example, read "1" and "5" for the
Chapter 1 Understanding the Barcode Scanner
*Enable
Good Read LED
Disable
Good Read LED
Good Read LED
Time-out after
0.01~2.54 sec.
(*40 ms)
Update
33