Example - CipherLab 2564 User Manual

2564 Barcode Scanner

EXAMPLE

KEY TYPE = NORMAL
For example, if you want to program the character "!" as the prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Hexadecimal
3. Read the "Validate" barcode to complete this setting.
KEY TYPE = SCAN CODE
For example, if you want to program the character "a" (= "1C" on the scan code table) as the
prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Scan Code" barcode.
3. Read the "Hexadecimal
4. Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
For example, if you want to program the character "!" (= "Shift" + "1" on keyboard) as the prefix
code:
1. Read the "Configure Prefix" barcode.
2. Read the "Add Shift" barcode.
3. Read the "Hexadecimal
4. Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = CTRL
For example, if you want to program "Ctrl+A" and "Ctrl+$" as the prefix code:
1. Read the "Configure Prefix" barcode.
2. Read the "Add Left Ctrl" barcode.
3. Read the "Hexadecimal
4. Read the "Add Left Ctrl" barcode.
5. Read the "Hexadecimal
6. Read the "Validate" barcode to complete this setting.
250
User Guide
Value" barcode on page 252 for "2" and "1".
Value" barcode on page 252 for "1" and "C".
Value" barcode on page 252 for "3" and "1".
Value" barcode on page 252 for "4", "1" (= "A").
Value" barcode on page 252 for "2", "4" (= "$").
Enter Setup