CipherLab 2200 Series Quick Start Manual

2200 Series Omnidirectional
Presentation Barcode Scanner
Quick Start Guide
Download the user manual and CD contents using GoBetween, available
at http://ccs.cipherlab.com .
USB Cable
Connect the USB cable between the scanner and the host computer.
The OPOS Kit can be downloaded from:
http://scanmaster.cipherlab.com/download/opos/CipherLabOPOSKit-latest.exe
USB Port
on the Computer
USB Cable
Dual USB Cable (to 2 Hosts)
Connect the Dual USB cable between the scanner and two host computers which
are both turned on.
The OPOS Kit can be downloaded from:
http://scanmaster.cipherlab.com/download/opos/CipherLabOPOSKit-latest.exe
USB Port
on the Computer
Dual USB Cable
www.cipherlab.com
>
EN
Dual USB Cable (to 1 Host only)
The dual USB connectors are attached to USB ports of a single host computer.
The OPOS Kit can be downloaded from:
http://scanmaster.cipherlab.com/download/opos/CipherLabOPOSKit-latest.exe
Dual USB Cable
Keyboard Wedge Cable
1. Power off the host computer.
2. Disconnect the PS/2 keyboard from the host computer.
3. Attach the PS/2 Male connector to the PS/2 port on the computer.
4. Attach the PS/2 Female connector to the PS/2 keyboard.
5. Power on the host computer.
PS/2 Male
Connector
Keyboard Wedge Cable
USB Port
>>
EN
1. Connect the RS-232 cable between the scanner and the host computer.
2. Fasten the side screws to secure the DB-9 connector.
3. Plug the power adapter into a power outlet nearby.
USB Ports
on the Computer
The scanner equipped with EAS is an optional solution. Attach the included EAS
cable between the scanner and the EAS device.
PS/2 Port
on the Computer
PS/2
PS/2 Female
Connector
Connector
RS-232 Cable
Power Adapter
DB-9
Connector
RS-232 Cable
EAS Connection (Optional)
Connecting to EAS Devices
EAS Cable
EN
RS-232 Port
on the Computer
Side Screw
EAS Receptacle