Inter-Character Delay - CipherLab 2564 User Manual

2564 Barcode Scanner
ALT Composing
By default, Alternate key composing is disabled. Select [Yes] to allow emulating Alternate key code
of a specific keyboard character. For example, [Alt] + [065] will be sent to host for the character
"A" regardless the keyboard type using.
Laptop Support
By default, laptop support value is disabled. It suggests enabling this feature if connecting the
wedge cable to a laptop without an external keyboard being inter-connected.

2.4.3 INTER-CHARACTER DELAY

By default, the inter-character delay is set to zero. Specify a value, ranging from 0 to
254 in units of millisecond, to match the computer response time of the keyboard
interface. Such delay time is inserted between every character being transmitted. The
longer the delay time is, the slower the transmission speed will be.
1) Read the barcode above to specify the inter-character delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.
76
User Guide
Value" barcode on page 251 for the desired inter-character delay
Yes
*No
Enable
*Disable
Inter-Character
Delay... (*0~254)
Enter Setup