CipherLab 2564 User Manual page 24

2564 Barcode Scanner
Working Mode
Upon powering up, the scanner will try to establish a connection with the BT cradle or a computer
®
with Bluetooth wireless technology. Refer to
The connection between the scanners and the cradle is made easy and reliable.
Note: If RS-232, USB Virtual COM or BT SPP is selected for output interface, the host can
directly send serial commands to configure the scanner. For example, run
HyperTerminal.exe and type the 6-digit command located under each setup
barcode. Refer to
10
User Guide
Appendix II Host Serial
Chapter 3 Setting up a WPAN Connection
Commands.
Enter Setup
for details.