Bt Cradle Serial Command And Equivalent Setup Barcodes - CipherLab 2564 User Manual

2564 Barcode Scanner

BT CRADLE SERIAL COMMAND AND EQUIVALENT SETUP BARCODES

Config<CR>
Purpose To configure the cradle.
Here is the setup barcode for this serial command:
Remarks A list of the current settings will be displayed. Run HyperTerminal.exe on your
computer and change the settings one by one.
DefaultSetting<CR>
Purpose To restore the default settings.
Here is the setup barcode for this serial command:
SingleConnection<CR>
Purpose To allow only one scanner connecting to the cradle.
Here is the setup barcode for this serial command:
MultiConnection<CR>
Purpose To allow up to seven scanners connecting to the cradle.
Here is the setup barcode for this serial command:
UseOnePortforAll<CR>
Purpose To use one Virtual COM port for all whenever connecting the cradle to PC via USB.
This setting requires you to connect one cradle at a time, and will facilitate
configuring a great amount of cradles via the same Virtual COM port (for
administrators' or factory use).
Here is the setup barcode for this serial command:
UseVariablePort<CR>
Purpose To use variable Virtual COM port when connecting more than one cradle to PC via
244
User Guide
Config
DefaultSetting
SingleConnection
MultiConnection
UseOnePortforAll
Enter Setup