Configure Related Settings - CipherLab 2564 User Manual

Chapter 3 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь

3.2.2 CONFIGURE RELATED SETTINGS

Sniff Mode (Power-saving)
By default, this feature is enabled, meaning the scanner will listen to the wireless network at a
reduced rate.
Note: When connecting more than two scanners to a notebook computer or PDA with
®
Bluetooth
setting for a more reliable connection.
Device Name Broadcasting
The scanner can be configured to hide itself from other devices equipped with Bluetooth
technology. Simply disable the device name broadcasting setting so that it won't be discovered by
any other computer or PDA. However, broadcasting must be enabled for establishing an initial
connection with the scanner. For example, you can disable device name broadcasting after
successfully connecting the scanner to WorkStation1. Such connection will be maintained
automatically unless the scanner is removed from the paired device list (called unpairing) by
WorkStation1 or any changes made to authentication and the PIN code. If you want WorkStation2
to connect to the scanner, you will have to enable device name broadcasting first.
Note: By default, device name broadcasting is enabled (which is required for initial
connection).
Changing Device Name
By default, the device name (local hostname) combines the model name with serial number (for
example, 2564BH3000001). Users are allowed to configure the device name with length up to 13
bytes.
wireless technology, we suggest that you disable the power-saving
*Enable
Disable
*Enable
Disable
Change Bluetooth
Local Hostname
Update
®
wireless
101