2564 Barcode Scanner
4.16.5 FIELD SEPARATOR (GS CHARACTER)
Decide whether to apply a field separator (to convert the GS control character to human
readable character).
1) Read the barcode above to enable field separator.
2) Read the
"Hexadecimal
string.
3) Read the "Validate" barcode to complete this setting.
4.16.6 GS1 FORMATTING
Decide whether to enable GS1 formatting for GS1 DataBar (RSS family).
4.16.7 APPLICATION ID MARK
Decide whether to add an application ID mark (1 character) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the
GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the
"Hexadecimal
'00' if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
150
User Guide
System" barcode on page 252 for the desired character
System" barcode on page 252 for the desired character. Read
Enable Field
Separator...
Enable
*Disable
AIMark1
AIMark2
Enter Setup