Security Level; Code Length Qualification - CipherLab 2564 User Manual

Chapter 4 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь

4.20.3 SECURITY LEVEL

Security Level renders more decoding accuracy giving consideration to barcodes' print
quality. Decide the security level for reading Code 11 barcodes.

4.20.4 CODE LENGTH QUALIFICATION

To prevent the "short scan" error, define the "Length Qualification" settings to ensure
that the correct barcode is read by qualifying the allowable code length.
If "Max/Min Length" is selected, the maximum length and the minimum length must

be specified. It only accepts those barcodes with lengths that fall between max/min
lengths specified.
 If "Fixed Length" is selected, up to 2 fixed lengths can be specified.
Note: The specified length(s) must include the check digit(s) the barcode contains.
1) Read the barcode to enable either Max. /Min. Length qualification or Fixed Length(s)
qualification.
2) Read the barcode for Max. Length or Fixed Length 1, and follow steps 3~4.
Repeat steps 2~4 for Min. Length or Fixed Length 2.
3) Read the "Decimal Value" barcode on page 251 for the desired length.
Normal
*High
*Enable Max./Min.
Length (1~127)...
Enable Fixed
Length(s)...
Update
159