Select System Number; Convert To Upc-A - CipherLab 2564 User Manual

2564 Barcode Scanner

4.19.1 SELECT SYSTEM NUMBER

Decide whether to decode the ordinary UPC-E barcodes only or both UPC-E0 and UPC-E1
barcodes.
 System number
System number

Warning: Because of the way system number 1 is encoded, if both system numbers
are enabled, the user might suffer from short scanning UPC-A or EAN-13
barcodes into UPC-E1 barcodes.

4.19.2 CONVERT TO UPC-A

Decide whether to expand the read UPC-E barcode, as well as its addons, into UPC-A.
 After conversion, the data follows UPC-A format and is affected by UPC-A
programming selections (e.g. System Number, Check Digit).
156
User Guide
enabled for decoding UPC-E0 barcodes.
0
enabled for decoding UPC-E1 barcodes.
1
System Number 0 & 1
*System Number 0 Only
Convert UPC-E to
UPC-A
*Do Not Convert
Enter Setup