Edit Fields - CipherLab 2564 User Manual

2564 Barcode Scanner

EDIT FIELDS

Up to five additional fields can be created for each editing format; each of them is
numbered from Additional 1 to Additional 5 accordingly.
 ®
If "Bluetooth HID" or "USB HID" is configured for interface, Key Type and Key Status will then
become applicable. You may decide whether or not to apply Key Status when "Normal Key" is
selected for Key Type.
Key Type
Scan Code Up to 2 scan code values are allowed.
Normal Key Up to 4 character strings are allowed.
1) Read the barcode above to specify an additional field, one at a time.
2) Read the "Hexadecimal
3) Read the "Validate" barcode on the same page to complete this setting.
266
User Guide
Value" barcode for the desired additional field.
Key Status
N/A

Add Shift

Add Left Ctrl

Add Left Alt

Add Right Ctrl

Add Right Alt
Refer to Keyboard Wedge
Edit Additional
Field 1
Edit Additional
Field 2
Edit Additional
Field 3
Edit Additional
Field 4
Edit Additional
Field 5
Enter Setup
Table.