Ricoh G-P2 Service Manual page 88

G160 Service Manual
1911 024 Simple Temp.:S2
1911 025 Duplex Temp. 1
1911 026 Duplex Temp. 2
1911 027 Duplex Temp.: S1
1911 028 Duplex Temp.: S2
1911 029 Duplex Temp.: S3
1911 040 Dec.Tmp Keep Time
[Fusing Rotat.] Fusing Unit Roller Rotation Control
Paper Type -> TC1: Thick paper 1, TC2: Thick paper 2, OHP, SP: Special, GL:
1912
Glossy paper
Rotation
When the printer is in the ready condition, the nip between the hot roller and
1912 001
pressure roller is in the same position. This may cause deformation of the
rollers. Therefore, a temporary rotation prevents this problem. SP 1912 001
turns this feature on or off. SP1912-003 and 004 control this rotation.
Pre-rotation: Fusing idling
1912 002 Prerotat. Speed
for specified printouts with this SP.
[0 to 500 / 100 / 1 sheet/step]
This SP controls when the temperature
*EGB reduction of SP1911-021 is done.
[0 to 500 / P2a: 30, P2b: 10 / 1 sheet/step]
Adjusts the temperature reduction for duplex
*EGB printing.
[0 to 200 / 2 / 1°C/step]]
*EGB [0 to 200 / 5 / 1°C/step]]
This SP keeps the target print temperature
for specified printouts with this SP in duplex
*EGB
printing.
[0 to 500 / 80 / 1 sheet/step]
This SP controls when the temperature
*EGB reduction of SP1911-025 is done.
[0 to 500 / P2a: 20, P2b: 10 / 1 sheet/step]
This SP controls when the temperature
*EGB reduction of SP1911-026 is done.
[0 to 500 / P2a: 0, P2b: 15 / 1 sheet/step]
Keeps the temperature reduction for the time
specified with this SP even the process
*EGB
control interrupts the multiple printing job.
[0 to 500 / P2a: 0, P2b: 60 / 1 sec/step]
[0 or 1 / 1 / -]
*EGB
0: Off 1: On.
*EGB
[0 to 2 / 2 / -]
81
23-Feb-06