Ricoh G-P2 Service Manual page 181

G160 Service Manual
5844 002 Vendor ID
5844 003 Product ID
5844 004 Dev Release Num
[Dlv Server Stting] Delivery Server Setting
5845
5845 003 DeliErr DisplTime
5845 004 Delivery Options
5846 [UCS Setting]
LDAP Search TOut
5846 010
Sets the length of the timeout for the search of the LDAP server.
AddtB Acl Info
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
5846 041
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
IniSet/All AddrB
This SP clears all the setting information managed in UCS and address book
5846 046
information (local, delivery, LDAP) and restores these settings to their default
values. Use this SP to initial the account information (user codes and
passwords) for system managers and users as well.
Ini Local AddrB
5846 047
Clears the local address book information, including the user code.
Ini LDAP AddrB
5846 049
Clears the LDAP address book information, except the user code.
Init All AddrB
5846 050
Clears all directory information managed by UCS, including all user codes.
Turn off and on the main power switch after executing this SP.
5846 051 Bkup All AddrB
*CTL Displays the vendor ID.
*CTL Displays the product ID.
*CTL Displays the device release version number.
Specifies the retry interval.
*CTL
[60 to 900 / 300 / 1 second/step]
Specifies the maximum number of retries.
*CTL
[0 to 99 / 3 / 1/step]
*CTL [1 to 255 / 60 / 1 /step]
*CTL
*CTL
*CTL
*CTL
Initializes all address information data except
*CTL
the administration account.
*CTL
174
23-Feb-06