Ricoh G-P2 Service Manual page 156

G160 Service Manual
[Pow. ON SelfChk] Power On Self-check
3554
3554 001 Time
3554 002 Temp./ Humidity
3554 003 Time 2
3554 004 Temp./ Humidity 2
[S.Chk Stand-by] Process Control Self-check Stand-by Time
3555
3555 001
[Image Process.] Display the Time of Last Image Processing
3556
3556 001 Time (Year)
3556 002 Time (Month)
3556 003 Time (Date)
3556 004 Time (Hour)
3556 005 Time (Minute)
[Image Process.] Image Processing
3557
3557 001 Temperature
3557 002 Humidity
[0 to 24 / 6 / 0.1 Hour/step]
Adjusts the threshold (Time) of the process
*EGB control from turning the power on.
[0 to 24 / 6.0 / 0.1 H/step]
Adjusts the threshold (Temperature/ Humidity)
*EGB of the process control.
[0 to 100 / 6 / 0.1 g/m
Adjusts the threshold (Time) for developer
*EGB mixing after turning the power on.
[0 to 200.0 / 36.0 / 0.1 H/step]
Adjusts the threshold (Temperature/ Humidity)
for developer mixing after turning the power
*EGB
on.
[0 to 100 / 6.0 / 0.1 g/m
Waiting time for the next job command after
job end. If the next job command comes
before this interval expires, the "JOB END 1"
*EGB
process control is not done. (SP3551 001 and
002)
[0 to 30 / 0 / 1 /sec]
*EGB [0 to 99 / 0 / 1 year/step]
*EGB
[1 to 12 / 1 / 1 month/step]
*EGB
[1 to 31 / 1 / 1 day/step]
*EGB [0 to 23 / 0 / 1 hour/step]
*EGB [0 to 59 / 0 / 1 minute/step]
*EGB [-127 to 127 / 0.0 / 0. 1°C/step]
*EGB [0 to 100 / 0 / 0.1% RH/step]
149
23-Feb-06
3
/step]
3
/step]