Ricoh G-P2 Service Manual page 15

G160 Service Manual
probably be different from the values on the report that you printed in step 1.)
SP 2181 1 for black skew
SP 2181 11 for magenta
SP 2181 21 for cyan
SP 2181 31 for yellow
5. Open the left cover
6. Adjust the skew adjustment cam [A] for each color with a screwdriver. You must
adjust the skew values for each color until they are all the same as the value for
magenta that you found in step 1, before you replaced the LDU.
For example: If the new value for K (after step 4) is –300 and the old value for
magenta (in step 1) is –250, you must adjust the skew for K until it is –250.
Turn the cam as shown in the "Cam Rotation Direction" column below to increase
the skew value.
Turn it in the opposite direction from this to decrease the skew value.
"Adjustment value" shows the change when you turn the cam one click.
Color
Yellow CW
Cyan CW
Magenta CCW
Black CCW
The adjustment values in the table are not exact values. These are
approximate values.
Cam Rotation Adjustment
Direction
14 μm
10 μm
10 μm
10 μm
Value
8
23-Feb-06