Ricoh G-P2 Service Manual page 169

G160 Service Manual
5803 [Input Check]
See 'Input Check Table'
5804 [Output Check]
See 'Output Check
Table'
[Destination] Destination Code Display
5808
5808 001 Destin. Code Disp
5810 [Fusing SC Reset]
5810 001 Fusing SC Reset
[Serial No.] Machine Serial No. Setting
5811
5811 001 Setting
5811 002 Display
5812 [Service TEL]
5812 001 Telephone
5812 002 Facsimile
Displays the destination code.
[0 to 4 / 0 / 1/step] Alphanumeric
*EGB
0: DOM (Japan), 1: OTHER, 2: ASIA
3: ERP (Europe). 4: USA
Resets a type A service call condition. Turn
the main power switch off and on after
resetting the SC code.
[SSP]
*EGB
Sets the machine serial number.
*EGB Displays the machine serial number.
Sets the telephone number for a service
representative. This number is printed on the
Counter List, which can be printed with the
*CTL
user's "Counter" menu. This can be up to 19
characters (both numbers and alphabetic
characters can be input).
Sets the fax or telephone number for a service
representative. This number is printed on the
*CTL
Counter List, which can be printed with the
user's "Counter" menu if the Meter Charge
162
23-Feb-06