Ricoh G-P2 Service Manual page 87

G160 Service Manual
[Print Speed Ctl] Print Speed Control for small paper sizes (A5 or smaller)
(Sheets of paper, Interval time or Temperature, Process Speed)
Simple [one-sided] or Duplex
1911
Process Speed -> LS: Low speed, RS: Regular speed
See section 6 for more about these SPs.
1911 001 PPM Down: RS: S
1911 002 PPM Down: LS: S
1911 003 PPM Down Inter.
1911 004 S-size Temp. 1
1911 006 S-size Temp. 2
1911 008 S-size Temp. 3
1911 014 S-size Temp.: S1
1911 016 S-size Temp.: S2
1911 018 S-size Temp.: S3
1911 020 Simple Temp. 3
1911 021 Simple Temp. 1
1911 022 Simple Temp. 2
1911 023 Simple Temp.:S1
1: ON
*EGB The print speed (PPM) is reduced after the
machine has printed this number of pages
continuously.
*EGB
[0 to 99 / 15 / 1 sheet/step]
The print speed goes back to the normal
*EGB speed after this interval.
[0 to 255 / 30 / 1 sec/step]
The temperature is decreased by this amount
to prevent overheating the fusing unit for
*EGB
small size paper.
[0 to 200 / 2 / 1°C/step]
*EGB
[0 to 200 / 5 / 1°C/step]]
*EGB
These SPs control when the above
*EGB temperature reductions are done.
[0 to 255 / P2a: 30, P2b: 25 / 1 sheet/step]
*EGB [0 to 255 / P2a: 20, P2b: 10 / 1 sheet/step]
*EGB
[0 to 255 / P2a: 50, P2b: 15 / 1 sheet/step]
This SP controls when the temperature
*EGB reduction of SP1911-022 is done.
[0 to 500 / P2a: 0, P2b: 15 / 1 sheet/step]
Adjusts the temperature reduction for
*EGB one-sided printing.
[0 to 200 / 2 / 1°C/step]]
Adjusts the temperature reduction 2 for
*EGB one-sided printing.
[0 to 200 / 5 / 1°C/step]]
*EGB This SP keeps the target print temperature
80
23-Feb-06