Ricoh G-P2 Service Manual page 49

G160 Service Manual
SC
Symptom
[Level]
data copied to the address
book over a network.
HDD mail data error
An error is detected in the
872
mail receiving data area of
[B]
the HDD at machine
initialization.
HDD mail transfer error
An error is detected in the
873
mail transmitting data area of
[B]
the HDD at machine
initialization.
Delete All error 1: HDD
An error is detected while the
all data of the HDD or
874
NVRAM are formatted
[D]
physically by the Data
Overwrite Security Unit
(B735).
Delete All error 2: Data area
An error is detected while the
all data of the HDD or
875
NVRAM are formatted
[D]
logically by the Data
Overwrite Security Unit
(B735).
876 Log Data Error
001 Log Data Error 1
Possible Cause/Required Action
Defective HDD
Incorrect path to the sever
1. Initialize the address book data
(SP5846-50).
2. Initialize the user information (format the
hard disk with SP5832).
3. Replace the HDD.
Defective HDD
Power failure during an access to the HDD
1. Initialize the HDD (SP5-832-001).
2. Replace the HDD.
Defective HDD
Power failure during an access to the HDD
1. Initialize the HDD (SP5-832-001).
2. Replace the HDD.
Not installed Data Overwrite Security Unit (SD
card)
Defective HDD
1. Install the Data Overwrite Security Unit
(B735).
2. Replace the HDD.
The logical format for HDD fails.
1. Turn the main switch off/on and try the
operation again.
42
23-Feb-06