Ricoh G-P2 Service Manual page 170

G160 Service Manual
5813 [Power Freqency]
5813 001
5814 [Power Voltage]
5814 001 Detected Voltage
[NRS Function] These settings are used for NRS.
5816
5816 001 I/F Setting
5816 002 CE Call
5816 003 Function Flag
5816 007 SSL Disable
5816 008 RCG Connect T/O
5816 009 RCG Write Timeout
5816 010 RCG Read Timeout
mode is selected with SP5-930-1. This can be
up to 19 characters (both numbers and
alphabetic characters can be input).
Displays the power frequency.
-
[0 to 100 / 0 / 1 Hz/step] Not used
Displays the detected power voltage.
-
[0 to 400 / 0 / 1 V/step] Not used
[0 to 2 / 2 / 1/step] Alphanumeric
0: Off, 1: CSS (Not used)
*CTL
2: Network (The remote service function is
on.)
[0 or 1 / 1 / 1/step]
*CTL
0: Start, 1: End
[0 or 1 / 0 / 1/step]
0: Off (The remote service function is
*CTL disabled.)
1: On (The remote service function is
enabled.)
[0 to 1 / 0 / 1/step]
*CTL
0: On, 1: Off
Sets the timeout counter for the remote
*CTL connection.
[1 to 90 / 10 / 1 second/step]
Sets the timeout counter for writing
*CTL processing.
[0 to 100 / 60 / 1 second/step]
Sets the timeout counter for reading
*CTL processing.
[0 to 100 / 60 / 1 second/step]
163
23-Feb-06