Ricoh G-P2 Service Manual page 173

G160 Service Manual
16
17
18
Cer Abnml Cause
Displays a number code that describes the reason for the request for update of
the certification.
0
1
5816 068
2
3
4
5
6
Cer Updt ReqID
5816 069
The ID of the request for certification.
Firm Updating
5816 083
Displays the status of the firmware update.
Firm UpFlg NoHDD
5816 084
This setting determines if the firmware can be updated, even without the HDD
installed.
Firm UpUsr Conf
This SP setting determines if the operator can confirm the previous version of
5816 085
the firmware before the firmware update execution. If the option to confirm the
previous version is selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the URL.
Firmware Size
5816 086
Allows the service technician to confirm the size of the firmware data files
The storing of the certification has failed, and the GW URL is being
notified of the failure of this event.
The certification update request has been received from the GW URL,
the GW URL was notified of the results of the update after it was
completed, but an certification error has been received, and the rescue
certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL
is being notified of the failure of the certification update.
*CTL
Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification
has expired.
An SSL error notification has been issued. Issued after the certification
has expired.
Notification of shift from a common authentication to an individual
certification.
Notification of a common certification without ID2.
Notification that no certification was issued.
Notification that GW URL does not exist.
*CTL
*CTL
*CTL
*CTL
*CTL
166
23-Feb-06