Ricoh G-P2 Service Manual page 113

G160 Service Manual
image area of plain paper 2 in color mode
(Process Speed, Paper Side) RS: Regular Speed, Paper Side: 1st or 2nd
2437 013 RS: 1st: T. Roll 2
2437 014 RS: 1st: Separa.
2437 021 RS: 2nd: T. Roll 2
2437 022 RS: 2nd: Separa.
[Normal2: [FC]] Transfer roller current and discharge plate voltage for the
image area of plain paper 2 in color mode
2438
(Process Speed, Paper Side) LS: Low Speed, Paper Side: 1st or 2nd
2438 013 LS: 1st: T. Roll 2
2438 014 LS: 1st: Separa.
2438 021 LS: 2nd: T. Roll 2
2438 022 LS: 2nd: Separa.
[Normal2:[K]:LE] Transfer roller current and discharge plate voltage for the
leading edge area of plain paper 2 in B/W mode
2451
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2451 003 Separation
2451 007 Trans.Roll2: 1st
2451 012 Trans.Roll2: 2nd
[Switch Timing] Switch timing from leading edge to normal, plain paper 2
2452
(Paper Type, Edge) Paper Type -> N: Normal, LE: Leading Edge
2452 002 T. Roll 2: N2: LE
Adjusts the transfer roller current.
*EGB [0 to 60 / P2a 20.0, P2b: 24.3/18.3 (NA/EU) /
0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
[0 to 60 / P2a 20.0/22.5 (NA/EU), P2b:
*EGB
19.5/21.3 (NA/EU) / 0.1 -µA /step]
*EGB [0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB [0 to 60 / P2a 12.5/15.0 (NA/EU), P2b: 12.3 /
0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
[0 to 60 / P2a 15.0/20.0 (NA/EU), P2b:
*EGB
13.5/15.3 (NA/EU) / 0.1 -µA /step]
*EGB [0 to 4 / 2.0 / 0.1 -KV/step]
*EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
*EGB
from these SP's values. For example, "20%"
*EGB
on the LCD actually means 100%.
*EGB [0 to 200 / 10 / 1 mm/step]
106
23-Feb-06