Ricoh G-P2 Service Manual page 177

G160 Service Manual
5824 [NVRAM Upload]
5824 001 NVRAM Upload
5825 [NVRAM Download]
5825 001 NVRAM Download
[Network Setting] Job spool settings/ Interface selection for Ethernet and
5828
wireless LAN
5828 050 1284 Compatible
5828 052 ECP
5828 065 Job Spool
5828 066 HD job Clear
[00000000h to FFFFFFFFh / 00000000h /
1/step]
Uploads the UP and SP mode data (except for
# counters and the serial number) from the
NVRAM to an SD card.
Downloads the UP and SP mode data from an
#
SD card to the NVRAM.
Switches Centronics IEEE1284
compatibility on/off for the network.
[ 0 or 1 / 1 / - ]
*CTL 0: Disabled, 1: Enabled
Selecting "0" disables bi-directional
data transmission.
Switches the ECP setting for Centronics
off/on.
[0 or 1 / 1 / -]
0: Disabled, 1: Enabled
*CTL
With "1" selected, SP5-828-050 must
be enabled for 1284 mode
compatibility.
Switches the job spool on/off.
*CTL [0 or 1 / 0 / -]
0: Disabled, 1: Enabled
Selects the treatment of the job when a
*CTL spooled job exists at power on.
[0 or 1 / 1 / 1/step]
170
23-Feb-06