Ricoh G-P2 Service Manual page 167

G160 Service Manual
5507 133 Interval: A4
5507 134 Interval: A5
5507 142 Interval: B5
5507 164 Interval: LG
5507 166 Interval: LT
5507 172 Interval: HLT
[SC/Alarm Setting]
Turns on or off the following SC alarm settings. These SP's are active when the
5515
CSS or NRS is enabled.
5515 001 SC Call
5515 002 Service Parts Ne
5515 003 Service Parts En
5515 004 User Call
5515 006 Communication Te
5515 007 Machine Infomat
5515 008 Alarm Notice
5515 009 Non Genuine Tonn
5515 010 Supply Automatic
5515 011 Supply Managemen
*CTL supply alarm counter increases by +1 when a
sheet of the related size is used. The paper
*CTL
supply alarm occurs when one of the paper
*CTL
supply alarm counters gets to the set value.
*CTL
[250 to 10000 / 1000 / 1/step]
*CTL
The alert is sent to the e-mail address that is
specified for the system administrator using a
browser and the built-in web server (Web
*CTL
Image Monitor).
When SP5-866-001 is set to "1", this SP is
enabled.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the service parts near end
*CTL call.
[0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the service parts end call.
*CTL
[0 or 1 / 0 / - ] 0: OFF, 1: ON
*CTL [0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the communication test call.
*CTL
[0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the machine information
*CTL call.
[0 or 1 / 1 / - ] 0: OFF, 1: ON
*CTL [0 or 1 / 0 / - ] 0: OFF, 1: ON
This SP activates the non genuine toner bottle
*CTL call.
[0 or 1 / 1 / - ] 0: OFF, 1: ON
This SP activates the automatic supply order
*CTL call.
[0 or 1 / 0 / - ] 0: OFF, 1: ON
*CTL This SP activates the supply management
160
23-Feb-06