Ricoh G-P2 Service Manual page 125

G160 Service Manual
area of thin paper in B/W mode
Process Speed -> LS: Low Speed
2633 007 T.Roll 2: LS
2633 008 Separation: LS
[Thin: [FC]] Transfer roller current and discharge plate voltage for the image
2636
area of thin paper in color mode
2636 013 Transfer Roller 2
2636 014 Separation
[Thin: [FC]] Transfer roller current and discharge plate voltage for the image
area, of thin paper in color mode
2638
Process Speed -> LS: Low Speed
2638 013 T.Roll 2: LS
2638 014 Separation: LS
[Thin: [K]: LE] Transfer roller current and discharge plate voltage correction for
2651
the leading edge area of thin paper in B/W mode
2651 003 Separation
2651 007 Transfer Roller2
Adjusts the transfer roller current.
*EGB
[0 to 60 / 15.0 / 0.5 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 100 / P2a 27.5/25.0 (NA/EU), P2b:
30.2/24.3 (NA/EU) / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 100 / P2a 17.5, P2b: 21.3/18.3 (NA/EU)
/ 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
[0 to 400 / 200 / 5%/step]
The value displayed on the LCD is different
*EGB
from these SP's values. For example, "40%"
on the LCD actually means 200 %.
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
*EGB
from these SP's values. For example, "20%"
on the LCD actually means 100%.
118
23-Feb-06