Ricoh G-P2 Service Manual page 165

G160 Service Manual
Make sure that SP5-307-1 is set to "1".
5401 [Access Control]
5401 200 SDK1 Unique ID
5401 201 SDK1 Certification
Method
5401 210 SDK2 Unique ID
5401 211 SDK2 Certification
Method
5401 220 SDK3 Unique ID
5401 221 SDK3 Certification
Method
[User Code Clear] User Code Counter Clear
5404
5404 001 User Code Clear]
[PM Alarm Interval] PM Alarm Interval
5501
5501 001 Printout
5504 [Jam Alarm]
5504 001 Jam Alarm
*CTL "SDK" is the "Software Development Kit".
These data can be converted from SAS
*CTL
(VAS) when installed or uninstalled. DFU
*CTL
*CTL
*CTL
*CTL
- Clears all counters for users.
Sets the PM alarm Interval. [0 to 9999 / 0 / 1k
prints/step]
The alert is sent to the e-mail address that is
specified for the system administrator using a
*CTL browser and the built-in web server (Web
Image Monitor).
0: Disables the PM alarm
When SP5-866-001 is set to "1", this SP is
enabled.
Sets the jam alarm level. If a paper jam
occurs, the jam alarm counter increases by
+1. If no paper jam occurs while the set
*CTL number of paper is output, the jam alarm
counter decreases by -1. The jam alarm
occurs when the jam alarm counter gets to
+10.
158
23-Feb-06