Ricoh G-P2 Service Manual page 152

G160 Service Manual
[Toner Mode] Toner Supply Control ([Color])
3301
3301 001 [K]
3301 002 [M]
3301 003 [C]
3301 004 [Y]
[Toner Mode] Toner Supply Control ([Color])
3302
3302 001 Fixed Rate: [K]
3302 002 Fixed Rate: [M]
3302 003 Fixed Rate: [C]
3302 004 Fixed Rate: [Y]
[Toner Mode] Toner Supply Control ([Color])
3303
3303 001 T. Supply Rate: [K]
3303 002 T. Supply Rate: [M]
3303 003 T. Supply Rate: [C]
3303 004 T. Supply Rate: [Y]
[Toner Mode] Toner Supply Control ([Color])
3304
3304 001 Upper Limit: [K]
3304 002 Upper Limit: [M]
3304 003 Upper Limit: [C]
3304 004 Upper Limit: [Y]
3304 005 Lower Limit: [K]
3304 006 Lower Limit: [M]
3304 007 Lower Limit: [C]
3304 008 Lower Limit: [Y]
[Toner Mode] Toner Supply Control ([Color])
3305
3305 001 Convert Time: [K]
*EGB Selects the method of the toner suppy for each
mode.
*EGB
[0 to 3 / 3 / 1/step]
*EGB
0: Fixed, 1: Coefficient (Pixel),
2: Coefficient (TD sensor), 3: Hybrid
See 'Detailed Section Descriptions – Process
*EGB
Control – Toner Near-end/Toner End
Detection'
*EGB
Adjusts the toner supply rate for each mode.
*EGB These SPs are enabled only when SP3301 for
each color is set to "0".
*EGB
[0 to 100 / 5 / 1%/step]
*EGB
*EGB
*EGB Displays the toner supply rate for each mode.
[0 to 100 / 0 / 1%/step]
*EGB
*EGB
*EGB
Adjusts the upper limit of toner supply rate for
*EGB
each mode.
*EGB
[0 to 100 / 100 / 1%/step]
*EGB
*EGB
Adjusts the lower limit of toner supply rate for
*EGB
each mode.
*EGB
[0 to 800/ 100 / 10 msec/step]
*EGB
*EGB Adjusts the coefficient for calculating the toner
145
23-Feb-06