Ricoh G-P2 Service Manual page 168

G160 Service Manual
5801 [Memory Clear]
5801 001 All
5801 002 Engine
5801 003 SCS
5801 004 IMH
5801 005 MCS
5801 008 Printer
5801 010 GWWS/NFA
5801 011 NCS
5801 014 DCS Setting
5801 015 Clear UCS Setting
5801 016 MIRS Setting
5801 017 CCS
5801 018 SRM Memory Clr
5801 019 LCS
5802 [Engine Free Run]
5802 001
call.
[0 or 1 / 0 / - ] 0: OFF, 1: ON
Resets the SP5801-002 through 016 except
- the security related data in 003, 010, 011and
015. These cannot be reset with SP mode.
- Resets or deletes the engine-related data.
- Clears the system settings.
- Clears IMH data. DFU
- Clears MCS data. DFU
- Clears the printer application settings.
Clears the web service data and the network
-
application data.
Initializes the system default and interface
settings (IP address also), SmartNetMonitor
-
for Admin, WebStatusMonitor settings, and
the TELNET settings.
- Resets or deletes the DCS-related data.
- Resets or deletes the UCS-related data.
- Resets or deletes the MIRS-related data.
- Resets or deletes the CSS-related data. FA
- Resets or deletes the SRM-related data.
- Resets or deletes the LCS-related data.
Performs a free run on the printer engine.
The machine starts free run in the same
condition as the sequence of A4/LT
printing from the 1st tray. Therefore, paper
should be loaded in the 1st tray, but paper
is not fed.
The main switch has to be turned off and
on after using the free run mode for a test.
161
23-Feb-06