Ricoh G-P2 Service Manual page 176

G160 Service Manual
Displays a number that describes the error code that was issued when either
SP5816-204 or SP5816-207 was executed.
Cause
Illegal Modem
Parameter
Operation Error,
Incorrect Setting
Error Caused by
Response from
GW URL
Instl Clear
5816 209
Releases a machine from its Cumin setup.
Print Com Log
5816 250
Prints the communication log.
5821 [NRS Address]
5821 001 CSS-PI Device
RCG IP Address (used
5821 002
for NRS)
Code Meaning
-11001 Chat parameter error
-11002 Chat execution error
-11003 Unexpected error
Inquiry, registration attempted without acquiring
-12002
device status.
Attempted registration without execution of an
-12003
inquiry and no previous registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 Basil not managed
-2394 Device not managed
-2395 Box ID for Basil is illegal
-2396 Device ID for Basil is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
*CTL
*CTL
*CTL [0 to 4 / 0 / 1/step] DFU
Sets the IP address of the RCG (Remote
*CTL
Communication Gate).
169
23-Feb-06