Ricoh G-P2 Service Manual page 222

G160 Service Manual
9910 021 MUSIC Vsg Adj.
9911 [TC Initial]
9911 001 Maximum Repeat
9911 002 Threshold
9912 [ST Sensor]
9912 001 read
[Waste Toner NF] Waste Toner Near Full
9914
Specifies the number of sheets to be printed after waste toner near full.
9914 001 Print 1
9914 002 Print 2
9914 003 Print 3
9914 004 Print 4
9914 005 Detection Times
9914 006 Near Full Count.
[LD Pow. Change] LDB Power Change
9918
[0 to 5/ 3 / 1 /step]
Selects the Vsg adjustment execution when
the line position adjustment is manually done.
[1 to 3 / 3 / 1 /step]
*EGB 1: Normal (ON except the line position
adjustment at printout interval)
2: Always ON
3: Always OFF
Adjusts the maximum toner cartridge
*EGB initializing time.
[1 to 30 / 15 / 1 /step]
Adjusts the threshold for toner cartridge
*EGB initializing.
[1 to 100 / 20 / 0.01 V/step]
*EGB
Adjusts the Vcnt. DFU
*EGB
[0 to 5000 / 1250 / 1/step]
*EGB [0 to 5000 / 250 / 1/step]
*EGB [0 to 5000 / 125 / 1/step]
Specifies the number of sheets to be printed
*EGB after replacing the waste toner bottle.
[0 to 5000 / 2500 / 1/step]
Displays the times of waste toner near full.
*EGB
[0 to 50 / 0 / 1 /step]
Displays the total counter for waste toner near
*EGB full.
[0 to 100000 / 0 / 1 /step]
215
23-Feb-06