Ricoh G-P2 Service Manual page 163

G160 Service Manual
5045 [Accounting count]
5045 001 Counter Method
[Refill Toner Disp] Toner Refill Display
5051
5051 001 Refill Toner Disp
5055 [Display IP address]
5055 001 Display IP address
5056 [Coverage Counter]
5056 001 Coverage Counter
[Bypass Long Paper] By-pass Long Paper
5150
5150 001 0: OFF, 1: ON
5169 [CE Login]
5169 001 CE Login
Selects the counting method if the meter
charge mode is enabled with SP5-930-001.
*CTL You can change the setting only one time.
[0 or 1 / 1 / -]
0: Developments, 1: Pages
Enable or disable the warning display when
you install a toner bottle that was refilled by
*CTL third party venders.
[0 or 1 / 0 / -]
0: Enable, 1: Disable
Display or does not display the IP address on
the LCD.
*CTL
[0 or 1 / 0 / -]
0: Not display, 1: Display
Display or does not display the coverage
counter.
*CTL
[0 or 1 / 0 / -]
0: Not display, 1: Display
Lets or does not let the by-pass tray feed extra
long paper (up to 1260 mm).
-
[0 or 1 / 0 / -]
0: Off, 1: On
Enables or disables the CE login.
*CTL
[0 or 1 / 0 / -]
156
23-Feb-06