Ricoh G-P2 Service Manual page 178

G160 Service Manual
5828 069 Job Spool (Protocol)
TELNET (0: OFF, 1:
5828 090
ON)
5828 091 Web (0: OFF, 1: ON)
5828 145 Active IPv6 Link
5828 147 Active IPv6 Stat (1)
5828 149 Active IPv6 Stat (2)
5828 151 Active IPv6 Stat (3)
5828 153 Active IPv6 Stat (4)
5828 155 Active IPv6 Stat (5)
5828 156 IPv6 Manual Addr
5828 158 IPv6 Gateway Add
[HDD] HDD Initialization
5832
5832 001
0: Data is cleared, 1: Automatically printed
Switches job spooling off or on and enables
settings for job spooling protocols.
[0 or 1 / 1 / 1/step]
0: Off, 1: On
Bit switches:
Bit 0: LPR
*CTL
Bit 1: FPT
Bit 2: IPP
Bit 3: SMB
Bit 4: Not used.
Bit 5: DIPRINT
Bits 6 and 7: Reserved
Enables or disables Telnet.
*CTL
[0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
Enables or disables the Web monitor.
*CTL
[0 or 1 / 1 / 1/step]
0: Disabled, 1: Enabled
Displays the IPv6 link local address for the
wireless LAN or Ethernet.
Displays the IPv6 stateless address 1 to 5 for
the wireless LAN or Ethernet.
Displays the IPv6 manual setting address for
the wireless LAN or Ethernet.
Displays the IPv6 gateway address for the
wireless LAN or Ethernet.
Prepares the hard disk. Use this SP mode only
#
when there is a hard disk error.
171
23-Feb-06