Ricoh G-P2 Service Manual page 183

G160 Service Manual
book. Specifically, this SP limits the password entry to numbers and defines the
length of the password.
Note:
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
Compl Opt4
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to symbols and defines the
length of the password.
5846 065
Note:
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
Encryption Stat
5846 094
Shows the status of the encryption function of the address book on the LDAP
server.
5848 [Web Service]
5848 004 ac: UD
5848 009 ac: Job Ctrl
5848 011 ac: Dev Mng
5848 022 ac:Uadmin
5848 210 LogType: Job 1
5848 211 LogType: Job 2
5848 212 LogType: Access
5848 213 PrimarySrv
5848 214 SecondarySrv
5848 215 Start Time
Interval Time
5848 216
Specifies the interval of transmitting log information. This SP is activated only
when the SP5848-217 is set to "2".
5848 217 Timing
*CTL [0 to 32 / 0 / 1 /step]
*CTL [0 to 255 / - / 1 /step] No default
Enables or disables the udirectory access
*CTL limitation.
0000: Disabled, 0001: Enabled
Switches access control on and off.
*CTL
0000: OFF, 0001: ON
*CTL
*CTL
*CTL
Displays the log server settings.
*CTL
These can be adjusted with the Web Image
*CTL
Monitor.
*CTL
*CTL
*CTL
[1 to 1000 / 1 / 1 hour/step]
*CTL
[0 to 2 / 0 / 1 /step]
176
23-Feb-06