Ricoh G-P2 Service Manual page 190

G160 Service Manual
5930 014 Mid Trans Unit
5930 016 Fusing Unit.
5990 [SP Print Mode]
5990 001 All (Data List)
5990 002 SP (Mode Data List)
5990 004 Logging Data
5990 005 Diagnosic Report
5990 006 Non-Default
5990 007 NIB Summary
SP7-XXX (Data Log)
7401 [Total SC Counter]
7401 001 Total SC Counter
7403 [SC History]
7403 001 Latest
7403 002 Latest 1
7403 003 Latest 2
7403 004 Latest 3
7403 005 Latest 4
[0 or 1 / 0 / -]
0: OFF, 1: ON
Displays or does not display the end display
for the transfer belt unit. This SP is activated
*EGB only when the SP5930-001 is set to "1".
[0 or 1 / 0 / -]
0: OFF, 1: ON
Displays or does not display the end display
for the fusing unit. This SP is activated only
*EGB when the SP5930-001 is set to "1".
[0 or 1 / 0 / -]
0: OFF, 1: ON
Does SP5-990-002, 004, 005, 006, and 007.
Prints an SMC report on all SP modes.
Prints an SMC report on the SPs that save
logs.
Prints the Self-Diagnostic Report.
Prints an SMC report on the SPs that have
settings, which are different from the defaults.
Prints the network configuration report.
Displays the number of SC codes detected.
*CTL
[0 to 9999 / 0 / 1/step]
*CTL Displays the SC codes detected.
The 10 most recently detected SC Codes are
*CTL
displayed on the screen, and also can be
*CTL
seen on the SMC (logging) outputs.
*CTL
*CTL
183
23-Feb-06