Ricoh G-P2 Service Manual page 123

G160 Service Manual
[Glossy2: [FC]: TE] Transfer roller current and discharge plate voltage
2578
correction for the trailing edge area of glossy paper 2 in color mode
2578 003 Separation
[OHP: [K]] Transfer roller current and discharge plate voltage for the image
area of OHP in B/W mode
2601
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2601 002 Transfer Roller2
2601 003 Separation
[OHP: [FC]] Transfer roller current and discharge plate voltage for the image
2606
area of OHP in color mode
2606 005 Transfer Roller2
2606 006 Separation
[OHP: [K]: LE] Transfer roller current and discharge plate voltage correction for
2621
the leading edge area of OHP in B/W mode
2621 002 Transfer Roller2
2621 003 Separation
[Switch Timing] Switch timing from leading edge to normal, OHP
2622
(Paper Type, Edge) Paper Type -> OHP, LE: Leading Edge
2622 002 T. Roll 2: OHP: LE
2622 003 Separa.: OHP: LE
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
*EGB
from these SP's values. For example, "20%"
on the LCD actually means 100%.
Adjusts the transfer roller current.
*EGB
[0 to 60 / P2a 15.0, P2b: 7.5 / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 60 / P2a 15.0, P2b: 21.3 / 0.1 -µA /step
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2 / 0.1 -KV/step]
*EGB
[0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
from these SP's values. For example, "20%"
*EGB
on the LCD actually means 100%.
*EGB [0 to 200 / 10 / 1 mm/step]
*EGB
[0 to 200 / 25 / 1 mm/step]
116
23-Feb-06