Ricoh G-P2 Service Manual page 180

G160 Service Manual
5840 011 WEP Key Select
[GWWS Analysis] Net File Application Analysis
5842
5842 001 Setting 1
5842 002 Setting 2
5844 [USB]
5844 001 Transfer Rate
Selects the WEP key.
[00 to 11 / 00 / 1 binary]
00: Key #1
*CTL
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
Prints or does not print the module log for each
bit.
[0 or 1 / 1 / 1/step]
0: Prints, 1: Not print
Bit switches:
Bit 0: System or other related application.
Bit 1: Captured related application
Bit 2: Certification related application
*CTL
Bit 3: Address related application
Bit 4: Control devices or transmission logs
related application
Bit 5: Output (print, fax or transmission)
related application
Bit 6: Documents related application in bit
7, 0: Not printed, 1: Printed
Bit 7: MSB related application
Selects the stamp type for the log of Net File
Application Analysis.
Bit switches:
*CTL Bit 0 to 6: Not used.
Bit 7
0: Minute/second/micro second
1: Date/hour/minute/second
Adjusts the USB transfer rate.
*CTL [0001 or 0004 / 0004 / -]
0001: Full speed, 0004: Auto Change
173
23-Feb-06