Ricoh G-P2 Service Manual page 186

G160 Service Manual
5859 003 Key 3
5859 004 Key 4
5859 005 Key 5
5859 006 Key 6
5859 007 Key 7
5859 008 Key 8
5859 009 Key 9
5859 010 Key 10
5860 [SMTP/ POP3/ IMAP]
5860 002 SMTP Server Port No. *CTL
5860 003 SMTP Auth.
5860 006 SMTP Auth. Encryp
5860 007 POP before SMTP
5860 008 POP to SMTP Wait
5860 009 Mail Receive Pro
5860 013 POP3/IMAP4 Auth.
*CTL specified storage place (see the note below).
When multiple key numbers are assigned, the
*CTL
logs are collected in this order: Key 1, Key
*CTL
2, ..., Key 9, Key 10.
*CTL
*CTL
The event is set with SP5-857-2. The
*CTL
storage is set with SP5-858.
*CTL
[0000000 to 9999999 / 0 / 1/step]
*CTL
Adjusts the number of the SMTP server ports.
[1 to 65535 / 25 / 1/step]
Enables or disables the SMTP authentication
for mail transfers.
*CTL
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
Encrypts or does not encrypt passwords for
POP3/IMAP4 authentications.
*CTL
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
Enables or disables the authentication that is
executed on the POP server before the
communication is established with the SMTP
*CTL
server to transfer mails.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
Adjusts the waiting time to access the SMTP
server after the authentication on the POP
*CTL
server.
[0 to 10000 / 300 / 1 ms/step]
Sets the protocol of receiving e-mail.
*CTL [1 to 3 / 1 / 1/step]
1: POP3, 2: IMAP4, 3: SMTP
Encrypts or does not encrypt passwords for
*CTL
POP3/IMAP4 authentications.
179
23-Feb-06