Ricoh G-P2 Service Manual page 154

G160 Service Manual
3411 004 Max. Print: [Cl]
3411 005 Pixel: [K]
3411 006 Pixel: [Cl]
[Process Cont.] Process Control
3501
3501 001 ON/ OFF
[Pntr. Display] Process Control Table Display ([Color])
3511
3511 001 [K]
3511 002 [M]
3511 003 [C]
3511 004 [Y]
[DEV.Potential] Development Potential Setting ([Color])
3521
3521 001 [K]
3521 002 [M]
3521 003 [C]
3521 004 [Y]
[DEV.Potential] Development Potential Setting ([Color])
3522
3522 001 MAX [K]
3522 002 MAX [M]
3522 003 MAX [C]
3522 004 MAX [Y]
[DEV.Potential] Development Potential Setting ([Color])
3523
Maximum: For low image coverage, more
sheets can be printed. This sets the maximum
*EGB
that can be printed after toner end is detected.
[0 to 750 / 0 / 1/step] DFU
*EGB Adjusts the number of sheets (A4), which the
pixel area is converted into for the toner end
after detecting the toner near end.
*EGB
[0 to 100 / 0 / 1 sheet/step]
Sets the method of the process control.
[0 to 3 / 0 / 1/step]
*EGB 0: Auto, 1: Fixed
2: Auto + LS, 3: Auto (Table fixed)
Do not use settings 2 and 3.
*EGB
Displays the current process control table for
*EGB
each mode.
*EGB
[1 to 30 / 15 / 1/step]
*EGB
*EGB
*EGB Displays the development bias for each color.
[1 to 800 / 0 / 1 V/step]
*EGB
*EGB
*EGB
Adjusts the maximum development bias for
*EGB
each color.
*EGB
[1 to 800 / 450 / 1 V/step]
*EGB
147
23-Feb-06