Ricoh G-P2 Service Manual page 120

G160 Service Manual
2528 007 T. Roll 2: 1st
2528 012 T. Roll 2: 2nd
[Thick2: [K]] Transfer roller current and discharge plate voltage for the image
area of thick paper 2 in B/W mode
2531
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2531 007 Transfer Roller 2
2531 008 Separation
[Thick2: [FC]] Transfer roller current and discharge plate voltage for the image
2536
area of thick paper 2 in color mode
2536 013 Transfer Roller 2
2536 014 Separation
[Thick2: [K]: LE] Transfer roller current and discharge plate voltage correction
2551
for the leading edge area of thick paper 2 in B/W mode
2551 003 Separation
2551 007 Transfer Roller2
[Switch Timing] Switch timing from leading edge to normal, thick paper 2
2552
(Paper Type, Edge) Paper Type -> TC2: Thick 2, LE: Leading Edge
2552 002 T. Roll 2: TC2: LE
2552 003 Separa.: TC2: LE
[Thick2: [K]: TE] Transfer roller current and discharge plate voltage correction
2553
for the trailing edge area of thick paper 2 in B/W mode
2553 003 Separation
2553 007 Transfer Roller2
*EGB The value displayed on the LCD is different
from these SP's values. For example, "20%"
*EGB
on the LCD actually means 100%.
Adjusts the transfer roller current.
*EGB
[0 to 60 / P2a 10.0, P2b: 9.2 / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
Adjusts the transfer roller current.
*EGB
[0 to 60 / P2a 12.5, P2b: 12.3 / 0.1 -µA /step]
Adjusts the discharge plate voltage.
*EGB
[0 to 4 / 2.0 / 0.1 -KV/step]
*EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
from these SP's values. For example, "20%"
*EGB
on the LCD actually means 100%.
*EGB
[0 to 200 / 10 / 1 mm/step]
*EGB [0 to 200 / 30 / 1 mm/step]
*EGB [0 to 400 / 100 / 5%/step]
The value displayed on the LCD is different
*EGB
113
23-Feb-06