Ricoh G-P2 Service Manual page 187

G160 Service Manual
5860 014 POP3 Srvr Port No.
5860 015 IMAP4 Srv Port
5860 016 SMTP Rx Port No
5860 017 Mail Rx Interval
5860 019 Mail Keep Setting
5860 020 ParMail Rec TOut
5860 021 MDN Res RFC2298
5860 022 SMTP Aut FileldRep
5860 025 SMTP Auth DirectSet
[0 to 2 / 0 / 1/step]
0: Automatic, 1: Not encrypt, 2: Encrypt
Adjusts the port number of the POP server.
*CTL
[1 to 65535 / 110 / 1/step]
Adjusts the port number of the IMAP4 server.
*CTL
[1 to 65535 / 143 / 1/step]
Adjusts the port number of the SMTP server.
*CTL
[1 to 65535 / 25 / 1/step]
Adjusts the interval of receiving an e-mail.
*CTL
[2 to 1440 / 3 / 1 minute/step]
Sets the way of keeping the e-mail in the
server.
[0 to 2 / 0 / 1/step]
*CTL
0: Not keeping
1: Keeping All
2: Keeping the only error e-mail
Adjusts the time for keeping the partial
e-mails. If the partial e-mails are not received
*CTL
during the set time, these are deleted.
[1 to 168 / 72 / 1 h/step]
Determines whether RFC2298compliance is
switched on for MDN reply mail.
*CTL
[0 or 1 / 1 / -]
0: No, 1: Yes
Determines whether the FROM item of the
mail header is switched to the validated
account after the SMTP server is validated.
*CTL
[0 or 1 / 0 / 1/step]
0: No. "From" item not switched,
1: Yes. "From" item switched.
Selects directly the way of SMTP
authentication if all SMTP authentications fail
*CTL due to the error in the SP5860-006.
This SP is activated only when SP5860-003 is
set to "Enable".
180
23-Feb-06