Ricoh G-P2 Service Manual page 47

G160 Service Manual
SC
Symptom
[Level]
established, though the
wireless LAN or Bluetooth
board is detected.
Wireless LAN or Bluetooth card error
855
An error is detected in the
[B]
wireless LAN or Bluetooth
card.
Wireless LAN or Bluetooth board error
856
An error is detected in the
[B]
wireless LAN or Bluetooth
board.
USB interface error
857
The USB interface cannot be
[B]
used due to a driver error.
HDD: Initialization error
860
The controller detects that the
[B]
hard disk fails.
HDD: Reboot error
The HDD does not become
861
ready within 30 seconds after
[D]
the power is supplied to the
HDD.
Possible Cause/Required Action
card to its board.
Loose connection
Defective wireless LAN or Bluetooth card
1. Check the connection.
2. Replace the wireless LAN or Bluetooth
card.
Defective wireless LAN or Bluetooth board
Loose connection
1. Check the connection.
2. Replace the wireless LAN or Bluetooth
board.
Defective USB driver
Loose connection
1. Check the connection.
2. Replace the controller.
HDD not initialized
Defective HDD
1. Reformat the HDD (SP5832).
2. Replace the HDD.
Loose connection
Defective cables
Defective HDD
Defective controller
1. Check the connection between the HDD
and controller.
2. Check and replace the cables.
40
23-Feb-06