Ricoh G-P2 Service Manual page 179

G160 Service Manual
5839 [IEEE 1394]
5839 007 Cycle Master
5839 008 BCR mode
5839 009 IRM 1394a Check
5839 010 Unique ID
5839 011 Logout
5839 012 Login
5839 013 Login MAX
5840 [IEEE 802.11b]
5840 006 Channel Max
5840 007 Channel Min
[0 or 1 / 1 /-]
*CTL
0: Off, 1: On
[0 to 3 / 3 / 1/step]
*CTL 0: Standard, 1: IRM Color Copy
2: Reserved, 3: Always Effective
[0 or 1 / 0 /-]
*CTL
0: Off, 1: On
[0 or 1 / 1 /-]
*CTL
0: Off, 1: On
[0 or 1 / 1 /-]
*CTL
0: Off, 1: On
[0 or 1 / 0 /-]
*CTL
0: Off, 1: On
*CTL [0 to 63 / 8 / 1/step]]
Sets the maximum number of channels
available for data transmission via the
wireless LAN. The number of channels
available varies according to location. The
*CTL default settings are set for the maximum end
of the range for each area. Adjust the upper 4
bits to set the maximum number of channels.
EU: [1 to 13 / 13 / 1/step]
NA/ AS: [1 to 11 / 11 / 1/step]
Sets the minimum number of channels
available for data transmission via the
wireless LAN. The number of channels
available varies according to location. The
*CTL default settings are set for the minimum end of
the range for each area. Adjust the lower 4
bits to set the minimum number of channels.
EU: [1 to 13 / 1 / 1/step]
NA/ AS: [1 to 11 / 1 / 1/step]
172
23-Feb-06