Starting The Agilent Chemstation Software The First Time - Agilent Technologies 7100 User Manual

5 Using the Agilent 7100 Capillary Electrophoresis System
Controlling the Agilent CE Instrument

Starting the Agilent ChemStation Software the First Time

Starting the Agilent ChemStation software the first time will lead to the
following message:
Figure 13
Please select Yes. The following dialog will allow you to configure the
instrument. Please provide an IP address or host name in the subsequent
dialog. Check the respective radio button and type in either the IP address or
the host name of your instrument.
Figure 14
The auto-configuration process will detect an instrument at the IP address or
host name you provide. You can confirm the instruments identity with the
serial number.
Please select "Configure..." if you would like to connect to a different
instrument.
82
Configuration at first start of ChemStation
Request of IP address or host name
Agilent 7100 Capillary Electrophoresis System User Manual