Agilent Technologies 7100 User Manual page 73

3 Type
Figure 10
Table 21
Value
?
/
ip <x.x.x.x>
sm <x.x.x.x>
gw <x.x.x.x>
exit
4 To change a parameter follows the style:
Agilent 7100 Capillary Electrophoresis System User Manual
?
and press [Enter] to see the available commands.
Telnet commands
Telnet commands
• parameter value, for example:
ip 134.40.27.230
Then press [Enter]; parameter refers to the configuration parameter you are
defining, and value refers to the definitions you are assigning to that
parameter. Each parameter entry is followed by a carriage return.
Description
Displays syntax and descriptions of commands
Displays current LAN settings
Sets new IP address
Sets new subnet mask
Sets new default gateway
Exits shell and saves all changes
LAN Configuration
Manual Configuration
4
73