Stage 8: Update Of The Agilent Chemstation Software - Agilent Technologies 1200 Series User Manual

Stage 8: Update of the Agilent ChemStation Software

If you have a Agilent ChemStation software version A.05.02 or higher, you do
not need to update your Agilent ChemStation software.
If you have a Agilent ChemStation software version A.05.01 or lower, please
update your software as described.
Starting from revision A.04.01 or A.04.02 of the Agilent ChemStation
If you have ordered the G1395A Upgrade kit you will be provided with a
A.04.02 and a A.05.01 update CD ROM, which gives you the choice of keeping
your old major software version or updating to A.05.01 release.
Hard- and Software Requirements
C A U T I O N
Agilent ChemStation Software will not run, if you use wrong PC hard- and software.
➔
1 If you decide to update your A.04.01 Agilent ChemStation to A.05.01, use
2 After you have updated your system, insert the 3.5" floppy labeled 'Driver
3 At the DOS prompt type A:.
4 Press Enter and then HPUPDATE.
1200 Series AT User Manual
Ensure that your PC hard- and software meets the requirements for A.05.01. A.05.01
requires Windows 95 or Windows NT 4.0 as operating system and a Pentium PC
with a minimum of 24 MB (NT -systems require also GPIB board Agilent 82341C).
Publication 12-5965-6805E gives detailed information about the PC requirements.
The application note can be obtained from the Internet
(http://www.chem.agilent.com/cag/literature/apglit.html) or your local Agilent
Technologies sales office.
the provided A.05.01 CD-ROM and follow the steps described in the
Installing your ChemStation manual, provided as portable document
format (PDF) file on the A.05.01 CD-ROM in the directory MANUALS\
INSTALL\LC. If you do not already have the Adobe Acrobat reader
installed, use the file MANUALS\READER\AR32e30.EXE to install the
reader.
update Disk (A.05.02 Beta)' and open a DOS prompt by selecting
Start->RUN and typing command.
Installing the G1330B Thermostat
Installing the G1330B Thermostat
3
39