Initialization Mode Selection - Agilent Technologies 7100 User Manual

Initialization Mode Selection

The following initialization (init) modes are selectable:
Table 18
Bootp
When the initialization mode "Bootp" is selected, the 7100 CE tries to
download the parameters from a Bootp server. The parameters obtained
become the active parameters immediately. They are not stored in the
non-volatile memory of the 7100 CE. Therefore, the parameters are lost with
the next power cycle of the 7100 CE.
Figure 3
Agilent 7100 Capillary Electrophoresis System User Manual
Initialization mode switches
SW6
OFF
OFF
OFF
OFF
Bootp (principle)
LAN Configuration

Initialization Mode Selection

SW7 SW8
OFF OFF
OFF ON
ON OFF
ON ON
4
Init mode
Bootp
Bootp & Store
Using Stored
Using Default
65