Installing The Instrument; Physical Connection - Agilent Technologies 7100 User Manual

Installing the Instrument

Physical Connection

Module is partially energized when switched off, as long as the power cord is
WA R N I N G
plugged in.
Repair or maintenance work on the module can lead to personal injuries, for
example a shock hazard, when the cover is opened and the module is connected to
the power.
• Ensure that line power cord is disconnected before setting up your Agilent CE
In general you have to go through the following steps.
1 Unpack the Agilent CE instrument and position it in a suitable location on
2 Connect the cables at the rear of the Agilent CE instrument.
3 Install the bottles in the replenishment system, see
Agilent 7100 Capillary Electrophoresis System User Manual
instrument.
your bench, see "Unpacking the Agilent CE Instrument"
Replenishment System if Needed"
Installing the Instrument
Installing the Instrument
"Preparing the
on page 111.
3
on page 54.
57