Agilent Technologies 7100 User Manual page 87

The current analysis mode is displayed in the top line of the CE diagram. The
analysis modes that can be selected under instrument configuration are CE,
CE+p, CEC or CE-MS.
For configuration without a DAD detector, for example with external
detectors, the DAD diagram will not be displayed. For configuration with an
additional pump, for example CE-MS, an additional pump diagram will be
displayed.
Lid latch
Cassette
Detector
Outlet lift
Inlet lift
Sample tray
Replenishment lift
Replenishment bottles
Figure 18
Agilent 7100 Capillary Electrophoresis System User Manual
Using the Agilent 7100 Capillary Electrophoresis System
Corresponding hardware components
Working with the CE Diagram
5
87