Starting Your Computer And The Agilent Chemstation Software - Agilent Technologies 7100 User Manual

Starting Your Computer and the Agilent ChemStation Software

After you have switched on your computer and it has booted up, start the
Agilent ChemStation by double clicking the Instrument Online icon in the Agilent
ChemStation menu.
In order to control the 7100 Capillary Electrophoresis instrument, the ChemStation revision
N O T E
must be B.04.02 or higher.
We recommend you install the Lab Advisor software revision B.01.03 or higher.
N O T E
If you have problems starting the Agilent ChemStation, check that the
software has been properly installed. During startup the ChemStation might
ask you to update the connection settings, see
this message in the future. If you want to update the instrument configuration,
select Yes. Typically, an instrument configuration must be updated for first
time use of the software, changes in the IP address or changes in the mode of
usage.
Please refer to the ChemStation documentation and online help for details on installation
N O T E
and configuration of the 7100 CE instrument.
Figure 12
Agilent 7100 Capillary Electrophoresis System User Manual
Using the Agilent 7100 Capillary Electrophoresis System
Instrument configuration during ChemStation startup
Controlling the Agilent CE Instrument
Figure 12. You might suppress
5
81